Use and maintenance manual
Press device
Model: FRA-100
__________________________________________________________________________________________________________
P a g . 8
Once the joint placement operation has been completed, we cover the whole welding surface
with silicone or adequate silicone paper recommended by the belt manufacturer.
Thus, on completing the welding, we guarantee that the joint zone has the same texture and
finish as the rest of the belt.
Before closing the press, we place the metal or fibreglass plate, according to the material to be
welded, to avoid marks caused by the radical change of temperature and pressure outside the
welding zone.
We introduce the trolley inside the press and down the top plate
Once the upper plate has been put in place, we close the press using the closing controls, softly
pressing with just two fingers, and in a balanced way on both sides.
