Revision 3
5
Problem solving
The dust extractors T7500/T8600 are designed and manufactured for severe environments and tasks, but the user
must note that the machine components must be protected from knocks and blows. Filter and sealing connections
are carefully chosen for the environment of the operator. Therefore, the machine must be handled with care if it
is to work correctly for many years.
Problem
Cause
Procedure
Motor does not start
No power
Connect the machine
Switch defective
Change
Motor stops immediately
Wrong fuse
Connect the correct fuse
Motor runs but there is
Hose not connected
Connect the hose
no suction
Hose blocked
Clean the hose
No plastic bag
Install plastic bag
Motor runs but suction is poor
Damage to the hose
Change hose
Blocked filter
Change filter
Top cover loose
Adjust
Dirt in the flap
Clean the flap.
Use protective equipment
Sealing defective
Change current seal
Dust blows from motor
Defective or loose filter
Adjust or change
Abnormal noise
Order service
SAVE THESE INSTRUCTIONS!
