Ermator S26, Руководство по эксплуатации

Страница: 6 / 19

Problem Cause Procedure
Motor does not start No power Connect the machine
Cable defective Change
Switch defective Change
Motor stops immediately Wrong fuse Connect to correct fuse
after starting
Motor runs but there is no Hose not connected Connect hose
suction Hose blocked Clean hose
No Longopac bag Fit Longopac bag
Motor runs but suction Hole in the hose Change hose
Poor Filter blocked Change filter
Top cover loose Adjust
Sealing defective Change current seal
Dust blows from motor Filter loose or defective Adjust or change
Abnormal noise Order service
! 4
Revision 0
SAVE THESE INSTRUCTIONS!