Erma Electronic SSI 9002, Инструкция по эксплуатации

Страница: 15 / 35

8. Procedure of programming
The procedure of programming is organized in several different steps.
Access to the selection of the programming levels
• Pressing pushbutton => access-code enter is active
• The display shows “c000"
• Changing the access-code by pressing the pushbutton or and confirm
the changed access-code by pressing the pushbutton
If the entered access-code is not correct, the instrument will jump back to the state
“operation level”.
8.1. Changing or controlling parameters
Activating the programming routine
• Pressing pushbutton
• LED 3 flashs green
• The display shows “c000"
• Changing the access-code by pressing the pushbutton or
• Confirm access-code by pressing the pushbutton
• The display shows “P-00"
Leaving the programming routine
• Pressing the pushbutton or until the display shows “PEnd”
• Confirm the display “PEnd” by pressing the pushbutton
• LED 3 is off
• The active state of the panel meter is “operation level”
Selection of the programming level
• Selecting the programming level by pressing the pushbutton or
• Confirm the programming level by pressing the pushbutton
• The display shows the number of the parameter of the selected programming level
For example: “0-00" => parameter 0 of the programming level 0
For example: ”2-00" => parameter 0 of the programming level 2
P
P
P
P
P
P
8. Procedure of programming
ERMA-Electronic GmbH 14