Erma Electronic SSI 3020 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 24

Erma Electronic SSI 3020 Скачать руководство пользователя страница 13

Lea ving the pro gram ming level

• Pres sing the push but ton

or

un til the dis play shows “xEnd”

For ex amp le: “0End” => lea ving pro gram ming level 0
For ex amp le: “2End” => lea ving pro gram ming level 2

• Con firm the dis play “xEnd” by pres sing the push but ton
• The dis play shows the pro gram ming level

For ex amp le: “P-00" => for pro gram ming level 0

Se lec tion of the pa ra me ter

• Se lec tion the pa ra me ter by pres sing the push but ton

or

• Con firm the pa ra me ter by pres sing the push but ton
• The dis play shows the last pro gram med va lue of the se lec ted pa ra me ter

Change and con troll the se lec ted pa ra me ter

• Change the va lue of the pa ra me ter by pres sing the push but ton

or

• Con firm the va lue of the pa ra me ter by pres sing the push but ton
• The dis play shows the pro gram ming level and the num ber of the pa ra me ter

For ex amp le: “0-05" => pa ra me ter 5 of pro gram ming level 0

8.2.

Overview of the programming levels

The pa ra me ters of the pa nel me ter se ries are or ga nized in dif fe rent pro gram ming
levels. Ac cor ding to the de sign of the pa nel me ter the re are se veral pro gram ming
levels available.

P-00: Pro gram ming level for con fi gu ra ti on of the pa nel me ter

The con fi gu ra ti on is used to ad apt the ab so lu te en co der and the pa nel me ter.

ERMA-Electronic GmbH

13

8. Procedure of programming

P

P

P

«
...
11
12
13
14
15
...
»

Содержание SSI 3020

























Отзывы:

Нет отзывов