Use and maintenance manual
Manual die cutter
Model: F-121
____________________________________________________________________________________________________________________
P a g . 1 4
Double finger die cut (50x20)
Preparation
We will introduce the 50x20 cutting head and sit it with knob (
B
). (See pages 7 and 8)
Once the cutting head is assembled, we will move the head to the end of the path on the right
side of the bench (
0
), releasing the cutting head
locking cam
.
We will position the head in position
“
ST1
”
to make the first curt of the upper fabric.
To position the
“
ST1
”
position head, we will pull up the
spring positioner
and move the head to
the correct position.
