background image

This document is not contractual. Erlab reserves the right to modify the present document without prior notice. MAJ UM_Flow-Sma

rt_2019-02-05_EN

Erlab’s state of the art Research & Development Laboratory relies exclusively on filtration

1

 Erlab R&D Laboratory

 

The engineers and chemists in our state-of-the-art R&D laboratory understand molecular 

filtration. We are committed to designing products that are safe and of the highest quality, 

strive  to  improve  our  products,  and  continuously  develop  new  products  that  provide 

greater protection in the laboratory.

2

 Strict Safety Standards

 

We hold ourselves to the highest standard and adhere to the strict AFNOR NF X 15-211: 

2009 filtration safety standard as endorsed by ANSI Z9.5-2012.

3

 A Published Chemical Listing

 

It all begins here. Without this listing, we are not compliant with AFNOR NF X 15-211. Our 

in-house laboratory tests, as well as independent testing, to verify the retention capacity 

of over 700 chemicals for our filters.

4

 Independent Testing

 

Erlab  filters  have  been  independently  tested  multiple  times  at  various  concentrations 

guaranteeing that our safety solutions all adhere to the strict performance criteria of the 

AFNOR NF X 15-211:2009 standard assuring that the emission concentration at the filter 

exhaust will always be lower than 1% of the TLV.

5

 Application Questionnaire (Valiquest)

 

Our laboratory specialists will recommend the appropriate filtration fume hood, type of 

filter, and personalized advice.

6

 Certificate of Validation for the chemicals used in the hood

 

A  certified  PhD  chemist  issues  a  Certificate  of  Validation  with  a  list  of  the  chemicals 

approved for use in the hood.

7

 Our Safety Program

 

We  back  up  our  products  100%.  This  program  includes  your  specialized  chemical 

evaluation, validation of your hood upon installation, and a filtration safety specialist at 

your service to ensure that your hood is operating to its full potential during it’s entire 

lifetime of use.

About Erlab

About Erlab

Erlab above

We provide safety, we protect your health

Erlab invented the ductless fume hood in 1968. With more than 50 years of experience in the 

field of chemical filtration and protection of laboratory personnel; we know the formula for 

safety. With Erlab, you will never have to wonder or worry if our products are safe. We build 

each one of the following 7 very important safety features into our products. Without all of 

them, your health and safety will be compromised.

France 

+33 (0) 2 32 09 55 80 │ [email protected]

United States 

+1 800-964-4434 │ [email protected]

China 

+86 (0) 512 5781 4085 │ [email protected]

Malaysia  

(+603) 6419 4514 │ [email protected]

Germany  

0800 330 47 31│ [email protected] 

United Kingdom 

 +44 (0) 1722 341 940 │[email protected]

Italy 

+39 (0) 2 89 00 771 │ [email protected]
 

Spain 

+34 93 673 24 74 │ [email protected]

             www.erlab.com

Содержание Captair Flow Smart

























Отзывы: