3. Unpacking and connecting the relay
The following items are included in the T-PRO 4000 carton pack:
•
USB cable
•
Letter of Compliance to ISO 9001:2015 standard
•
Letter of Compliance to CE requirements (if requested)
There are no power switches on the relay. When the power supply is connected, the relay starts
its initialization process.
1. Connect power supply to #17/16, as shown in Figure 3/4. The wire used for the power supply
wiring shall be at least 18 AWG (1.02 mm2), 600 V.
2. Ground the T-PRO at #18, as shown in Figure 3/4
4. T-PRO 4000 relay front and rear panel layout
Figure 1
– T-PRO 4000 Front View (3U)
The relay is calibrated before it leaves the factory