6
The
sensor window
is located behind the
insertion ramp.
main switch
Switch on the unit
Switch on the unit at the main switch.
The touchpanel first shows the Erkodent Logo and
then it requires to check if the sensor window is dusty
or dirty. If so, dust off or clean with a damp cloth (no
cleaning agents!).
After a few seconds the basic display automatically
appears.
The touchpanel responds in the framed function
fields on slight pressure. For input the enclosed brush
for granules is equipped with a rubber cap. However,
input is also possible with fingers.
Basic display: Select language,
for any further use of the unit the language selected last time is used.
1.
Select language selection
2.
Select language
3.
Menu, selected language
Note:
The function field »X«
interrupts the respective
process. Each termination
has to be confirmed.
Note:
The
function field
»delete“
has to be confirmed.
Note:
If within 10 seconds the
next required working step
will not be performed, the
working program will be
switched off for safety
reasons.