Installation & Operation Manual
Proven Quality since 1892
ECON Sample Cooler fig. 1700
www.eriks.com
Rev. 4
8. Operation
Be sure that the cooling water is in its maximum flow before opening or closing the sample inlet
valve in order to avoid the risk of scalding.
The sample valve must also be closed before the cooling water valve
9. Maintenance
Before starting any service jobs, make sure that the medium supply to the pipeline is cut off,
pressure was decreased to ambient pressure, the pipeline is completely cleaned and ventilated
and the plant is cooled down. Always keep safety instructions in mind and take all personal safety
precautions.
During maintenance, the following rules should be observed:
-
always keep personal safety precautions in mind and always use appropriate protection
e.g. clothing, masks, gloves etc.
-
be alert that the temperature still can be very high or low and can cause burns.
-
there are no internal components that require maintenance.
-
check the Sample Coolers on all possible leaking possibilities.
-
check if all bolts and nuts, are still fastened.
-
we recommend that Sample Coolers are serviced as necessary. Sample Coolers should
be checked periodically (at least yearly), to verify that they are operating correctly.
