Erie water treatment SOF-WHF series, Техническое руководство, Страница: 9 / 24

ELECTRONIC CONTROL PANEL
Page 9
DIAGNOSTICS MODE

In the Diagnostics mode several operating parameters
can be consulted; particularly during a service intervention,
these parameters can be helpful to identify the cause of a
problem or malfunction.

Before entering the Diagnostics mode, make sure that
the appliance is in service mode.

In case no button is pressed in a period of 5 min, the
control panel will automatically return to the service mode!
Accessing the Diagnostics mode
1.
Press the scroll button and hold it for 6 sec until the
display shows:
2.
Within 10 sec, press the down button; the display will
show:

You are now in the Diagnostics mode.
 Press the scroll button to advance to the next
diagnostics parameter.
Available diagnostics parameters

Regen X days ago: number of days since last
regeneration.

In Srvc: total number of days in service.

# of Regens: number of regenerations since installation.

Regen @: setting of time of regeneration.
 Interval: setting of number of days between
regenerations.

Cycle X: setting of length of corresponding regeneration
cycle.

Units: control is programmed for Metric units.

Regen: setting of the regeneration mode.

Valve Type: setting of valve type.

MP Resets: number of resets of microprocessor (for
factory purpose only).

Memory Reset: number of corrupt memory start-ups (for
factory purpose only).
 EZRFTg EZDRV r02: software version.
Exiting the Diagnostics mode
1.
Press the scroll button repeatedly until the display
shows:
 Press the up or down button to exit the
Diagnostics mode.
Exit
Regen XXdays ago
System Check