2BInstalling the Equipment
Table 4
Types of Connector
Type of Connector
Description
Inputs
Technical Earth
Connect the Receiver's Technical earth to a suitable point.
RS232 Remote
A 9-way, D-type male connector provides a connection to a
PC for remote control and software upload.
QPSK IN
(Input Option)
An F-type female connector provides an L-band input.
ASI IN
(Input Option)
A 75
Ω
BNC connector provides an ASI input
Outputs
CVBS
2 x 75
Ω
BNC connectors provide a high quality analogue
composite video output from the unit.
Note:
Russian SECAM output option uses the
existing CVBS output connectors
ASI OUT
(Output Option)
A 75
Ω
BNC connector provides an ASI output
Dual ASI / SDI OUT
(Output Option)
Two 75
Ω
BNC connectors provide both ASI and SDI
outputs.
Dual IP OUT
(Output Option)
Two RJ-45, female connectors.
Audio 1 and 2
Two 9-way, D-type male connectors.
Audio outputs 1 and 2 are analogue and digital
(simultaneous).
Ethernet
A RJ-45, female connector.
RS232 Data
A 9-way, D-type female connector provides an RS-232
low-speed data output.
Conditional Access
Interface
A single common interface slot, for insertion of the CA
Module.
Relay/GPO
A 9-way, D-type female connector provides a relay and GPO
interface which can be used to send signals to remote
equipment. (1 x Alarm relay and 5 x GPO relays). The GPOs
can be configured to trigger on particular events and the
relay is triggered when any alarm occurs.
EN/LZT 790 0002/1 R1A
2011-02-21
9 (20)
