Ericsson RX1290, Справочное руководство

Страница: 47 / 176

Operating the Equipment Locally
3.5 Setting Up Preset Services (Menu 1)
3.5.1 Using Preset Services
This group allows up to 40 Services to be stored as presets. Selecting a Service
from the preset list in Menu 1 automatically reconfigures the Multi-Format Receiver
to receive that Service with its associated parameters set as stored.
3.5.2 Setting Up a Preset Service
Follow the steps in Table 3.5 to store the current Service as a preset.
Table 3.5 Setting Up a Preset Service
Step Action Result
1 Use the menus to set-up the unit
so that the required Service is
current.
(Refer to
Section 3.7, Service
Configuration (Menu 3) ).
This selects the Service and associated
parameters for the preset process.
2 Go to Menu 1 to view the Preset
menu.
This displays the menu which allows the
Current Service to be stored at a chosen
location (01 – 40). If there is no Current
Service, the menu display reads NO STORED
SERVICE.
3
Select a location to store the
preset. The
Edit mode cannot
be entered unless a valid
Service being decoded.
Use Edit and the arrow pushbuttons to step
through the stored items. This allows a specific
location to be chosen. Any vacant locations
are marked by NO STORED SERVICE.
4 Press Save . This stores the current Service and its
associated parameters as a preset in the
selected location. This adds the Service to the
list displayed on page 1.
EN/LZT 790 0003/2 R1A 3-9