Ericsson Redback Networks SmartEdge 1200, Руководство по оборудованию

Страница: 72 / 178

Mounting the Removable Air Ramp
4-12 SmartEdge 1200 Router Hardware Guide
Install the Air Ramp Mounting Brackets
Perform the following steps to install either version of the air ramp mounting brackets:
1. Position a mounting bracket against one side of the removable air ramp, lining up two of the screw holes
in the bracket with two of the screw holes in the side of the air ramp. Ensure that the bracket position
corresponds to the position of the chassis mounting brackets. See Figure 4-8, Figure 4-9, Figure 4-10,
and Figure 4-11 for these details.
2. Using a Phillips screwdriver, secure the bracket to the air ramp; tighten each screw using 15.0 inch-lbs
torque (1.7 Newton-meters) maximum.
3. Repeat steps 1 and 2 to install the second bracket on the other side of the air ramp.
Figure 4-8 Installing Air Ramp Brackets for Recessed Mount Position
Figure 4-9 Installing Air Ramp Brackets for Flush Mount Position