Ericsson MX8400, Справочное руководство

Страница: 160 / 226

Conditional Access
Table D.3 Set Up an EMM Generator
Step Action Result Comments
1 In nCompass Control,
Equipment Set-up ,
select the required
Physical Map .
Displays a map view in
which to make
changes. Use File , Open to display an offline
version of the map.
2 From the list of devices,
select the required
device and drag and
drop it onto the map.
Right-click the copied
icon to display a
contextually-sensitive
menu Displays a list of CA
vendors An EM Injector icon is added to the
Physical Map.
3 Select Properties to
display the dialog box
This displays a dialog
box similar to that
shown in
Figure D.6
This device can be grouped in a similar
way to other devices. Leave switch mode
set to automatic and backup group to 0.
4 Click OK to save the
parameters for that
device.
The device can now be
positioned on the
screen by drag and
drop using the left
mouse button and can
then be connected to
other devices. Device's properties can be edited by
double-clicking the device icon or right-
clicking and selecting Properties.
Figure D.6 EMM DVB Simulcrypt Injector [Device Tab]
2/1553-FGC 101 1014 Uen B D-10