3
UNPACKING
When unpacking, be sure all parts are included. The following material
should be part of the kit.
•
One (1) Enclosure with retaining cover
•
Two (2) Machine screws with washers and nuts: No. 10-16 x 2.5"
•
Two (2) Thread forming screws: No. 10-16 x 3/4" or (machine screws)
•
One (1) AC Outlet Strip
•
Four (4) self-adhesive rubber feet
ASSEMBLY
REQUIRED TOOLS
•
Phillips screwdriver
•
Pliers or 1/4' nutdriver
ASSEMBLY
1.
Install the AC Outlet Strip to the bottom of the enclosure using the two
machine screws. Insert the machine screws from the bottom of the
enclosure through the two holes and through the mounting holes of the
AC Outlet Strip. Use a washer and a nut on each screw and tighten
securely (see Figure 1, view A).
2.
Insert one of the Dual Rate Charger Units into the enclosure and insert
its AC power cord plug into one of the receptacles of the AC Outlet Strip
(see Figure 1, view B).
VIEW A
VIEW B
Figure 1 - Assembly of 6-Unit Charger