5. Fit the CONNECTOR B securely by pressing
the FLEX P.C.B. on the CONNECTOR B with
the thumb tip as shown.
Note: Be careful not to damage the connector
pins.
6. Hold the FLEX P.C.B. of the CONNECTOR A
with your fingers, and connect by pressing the
FLEX P.C.B. with the index finger tip as
shown.
1. Place the upper part of the INTERNAL UNIT
in the FRONT CASE. After deciding the po-
sition, install the INTERNAL UNIT in the
FRONT CASE as shown.
Then, set two screws (TORX, M3) at the bot-
tom of the FRONT CASE.
Note: Be careful not to catch the FLEX P.C.B. of
the CONNECTOR A between the FRONT
CASE and the INTERNAL UNIT.
3. INTERNAL UNIT INSTALLATION
LBI-38741
11
