Ericsson M-PA EDACS, Руководство оператора

Страница: 30 / 40

desired priority indicator ap-
pears. "S" for non-priority, "2" for
priority-two, "1" for a priority-
one, or no indicator to remove
the channel from the scan list. If
a new priority channel is se-
lected the previous correspond-
ing priority channel will become
a non-priority scan channel.
One of the following messages
may be momentarily displayed
"SCAN DIS"- The radio is not
programmed to
scan.
"FIXED P1"- A p r i o r i t y - o n e
c h a n n e l h a s
been program-
med into the ra-
d i o . A n e w
p r i o r i t y - o n e
channel cannot
be selected.
"FIXD LST"- A fixed scan list is
programmed into
the radio. It is not
p o s s i b l e t o
change the list
w i t h o u t r e p r o-
gramming the ra-
dio.
4. To add or delete additional chan-
nels, repeat steps 2 and 3.
Using Scan
Toggle scan on or off by pressing
SCAN. The "SCN" status flag turns on
when the radio is scanning.
If programmed for dual-priority scan
operation, the priority-one, priority-two and
then the remaining channels on the scan
list will be scanned. Once a carrier is de-
tected and if programmed, the correct
Channel Guard is decoded, the display will
indicate the channel. Sampling of the pri-
ority-one and priority-two channels will
continue. Should a priority-one or two
channel carrier, regardless of Channel
Guard, be detected while a non-priority
channel is being received, the display
name is updated, the applicable status
indicator, "1" or "2" lights, and the channel
is switched to the priority channel. Sam-
pling of the priority-one channel will con-
30