31
À
The radio switches to the Monitor mode and the
PG icon flashes.
4.
To respond to the call, remove the microphone from
the hookswitch. Hold the microphone approximately
2 inches from your mouth, press the PTT button on
the side of the microphone and speak in the
microphone.
5.
To end the call and return to the Selective Mode,
press the EMER button. The radio will remain in the
Monitor Mode and the PG icon will continue to
flash until the user presses the EMER button.
?
At this point in the menu, radios equipped with a DTMF
microphone may enter any radio ID from the DTMF keypad.
1.
When the desired individual ID or name appears in
the display, press the PTT button on the side of the
microphone and speak in the microphone. The red
TX indicator should light.
2.
When you have finished speaking, release the PTT
and wait for a response (if expected). If your radio is
programmed to receive an individual
acknowledgement and does not receive an
acknowledgement, the radio will display FAIL.
3.
When the call is complete, press the
EMER
button
and the radio will return to the Selective Mode.
