Ericsson KH-500, Руководство оператора

Страница: 38 / 64

38
Using The Radio With Scan
The Selected Channel
The selected channel is the channel in the display
when scan is turned on by the button. The
selected channel does not necessarily have to be a
channel on the scan list. When a signal is not being
received, the radio reverts to this channel for
transmitting. When a signal is being received, the radio
can be pre-programmed to either revert to this selected
channel or remain on the receive channel for
transmissions.
If the radio was pre-programmed for transmit on the
selected channel, the selected channel will be
displayed on the LCD when the transmitter is keyed.
If the radio was pre-programmed for transmit on the
receive channel, the channel will be displayed on the
LCD and the transmitter will transmit on that channel
providing this is accomplished during the pre-
programmed time delay before scanning resumes.