Ericsson GH198, Руководство пользователя

Страница: 37 / 68

0. Ringing Signal Volume
You can set the level of the ringing signal in four steps, or
turn the ringing signal OFF.
1. Press M , followed by 0 .
‘‘RING LEVEL’’ is displayed, together with the
current setting, either:
#----- (lowest level)
##----
###-
####
(highest level)
-------- (turned OFF)
2. Press any numeric key (repeatedly) to set the
ringing signal level, or turn the ringing signal OFF.
Each of the four levels is accompanied by an
audible ringing signal.
3. Store the new setting by pressing S ,
▲
or
▼
.
1. Key Clicks, Silent Keypad or DTMF
Signals
You can decide that DTMF signals will be sent if the
numeric keys
0 -- 9 ,
*
and # are pressed when a call is in
progress. See also the chapter DTMF Signalling earlier in
this manual.
On the other hand, if you do not wish DTMF signals to be
sent, you can decide whether key clicks or nothing at all will
be heard when you press the keys (silent keypad).
1. Press M , followed by 1 . The current setting is
displayed, either:
‘‘CLICK ON’’ or
‘‘SILENT’’ or
‘‘DTMF ON’’
2. Select the desired setting by pressing any numeric
key (repeatedly).
3. Store the new setting by pressing S ,
▲
or
▼
.
If you select the Silent Keypad setting, the error
signal will be turned off, too.
2. Call Forwarding
This facility is not available unless you have subscribed to
it. You should also read the operating instructions from your
network operator.
You can decide that incoming calls will be forwarded
(diverted) to another number:
● if you are busy (engaged in a call).
●
if you do not answer .
●
if your phone is unreachable ( or turned off).
You can also forward all calls .
This Special Function lets you activate or cancel one or
more of the above services. You can also review whether a
particular service is activated or not.
Special Functions
32