Ericsson F251m, Руководство пользователя, Страница: 22 / 70

22/70
data calls (Internet browsing, e-mail, etc.) through the FCT
line.
To be able to send and receive data calls, you need:
- a PC equipped with an analog modem and the appropriate
computer program (Web Browser, E-mail, etc). This is a
standard configuration for most PCs in the market.
- a SIM card that supports data transmission over the GSM
network.
Note: if you do not have a modem in your PC, the FCT can be
configured to act as a modem itself. This requires the
installation of the FCT modem drivers on your PC. For this
specific configuration, please refer to the FCT Data Kit (see
“FCT accessories” on page 41).
The FCT should be pre-configured with the settings from your
network operator. For detailed information on FCT data
configured settings, please consult your distributor or network
operator.
You can choose between two data access types (connection
methods):
GPRS (General Packet Radio Service) data : GPRS allows
fast and efficient access where you can be always online
(although you are only charged for the amount of
information that you exchange). You need a SIM card that
supports GPRS. Please contact your network operator for
charging subscription details.
GSM data : normally, you pay for all the time you are
connected. You need a SIM card that supports GSM data.
For fast and efficient access, try the GPRS access type.
9.1 GPRS DATA ACCESS TYPE
GPRS data access type allows you to make outgoing calls
only, usually to connect to the Internet.
Your GSM network operator provides you with an Internet
connection as part of the GPRS service.