manualshive.com logo in svg

Ericsson F250m, Руководство пользователя

Поделиться
Скачать
Ericsson F250m Скачать руководство пользователя страница 15

14

Connections

Note: once you have entered the PIN code for the
first time, you will not have to enter it again unless
you change your SIM card. The FCT performs this
operation automatically in case of power failure.

Network search

After you have switched on your FCT and entered the
PIN, the FCT automatically searches for a network.

Note: if the red light is off, there is a problem with
the power supply. See “Troubleshooting and FCT
indicators” on page 32.

When a network is found, the green light switches on
or flashes depending on the GSM signal strength. 
See Light Indicators on page 32.

Note: if the green light is off, you do not have access
to the GSM network at your present location.

Now you have prepared the FCT for wall installation.
Please, follow the instructions below for complete
wall installation.

Installing the FCT on the wall

FCT Location

The GSM signal strength available at the FCT
location affects the performance of the unit. The
stronger the GSM signal, the better the FCT
performance.

Tip: test several potential locations by moving the
FCT while looking at the green light . Select the
location where the green light is steady, or the
location with the highest amount of flashes.

Note: moving the FCT as little as 20 cm can affect
the GSM reception quality.

Location Testing

Number of Green Light flashes

Location status

0                                         

Unacceptable

1           -            -            -       Acceptable

2          - -          - -          - -     Good

3         - - -        - - -        - - -    Very good

Steady -------------------------------

Excellent

Содержание F250m


















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды