Ericsson ECN320, Руководство пользователя

Страница: 153 / 188

Command Line Interface
1553-CNH 160 0787 Uen PA2 2005-09-23
145
Default Setting
None.
Command Usage
This command configures or removes Service VLANs (VLANs that are
used for end user traffic). When a VLAN is added, the VLAN will be config-
ured on all ports of the ECN (both downlink and uplink) and on all ports of
daisy-chained switch-extensions. If no service VLANs are configured, all
End-user traffic will be discarded. The VLANs are configured or removed
immediately after the command is executed.
Caution!
Do not use any of the VLAN IDs that are used for management. Apart from
the configurable management VLANs (246, 247, 248, and 249), VLANs 1
and 4093 are used internally in the ECN.
Example
ecn330(config system)# service-vlan add vlan-id 10
vlan-name data
ecn330(config system)# service-vlan remove vlan-id 10
11.6.10.15 show
Use this command to show the setting of system commands.
Command level:
ecn330(config system)#
Syntax
show calendar
show interface
show local-management
show ntp
show service-vlans
show software-versions