Ericsson ECN320, Руководство пользователя

Страница: 123 / 188

Command Line Interface
1553-CNH 160 0787 Uen PA2 2005-09-23
115
Example
ecn330
(config)# ecn spanning-tree transmission-limit 4
11.6.3.6 unmanaged-switch
Use this command to add or remove an unmanaged switch.
Command level:
ecn330(config)#.
Syntax
ecn unmanaged-switch {add|remove} port < port > ip
< IP_address >
ecn unmanaged-switch remove port < port >
Arguments:
•
unmanaged-switch add/remove
– Add or remove an unman-
aged switch.
•
port <port> -
Only downlink ECN ports number 1-24 is al-
lowed.
•
ip <IP_address> -
The IP address of the unmanaged switch.
Default Settings
None.
Command Usage
The unmanaged-switch function is used to enable the ECN port for a 3
rd
party switch. Valid ECN ports are from port 1-24. The 3
rd
party switch must
be configured with the value listed in Table 13 on page 115. For more de-
tailed information for configuration please refer to the 3
rd
party switch user
guides.
Note: The configuration must be done through the console port of the 3
rd
party switch and the 3
rd
party switch must comply with RFC1493.
Table 13 Pre-configuration of the 3
rd
Party Switch
Parameter Value
Switch IP Address (Static IP) 10.0.0.1…254 (see