Not for commercial use - Ericsson Inc.
Some menus/features are operator dependent.
2
Conditioning the Battery
The battery needs to be recharged and fully discharged
2-3 times to reach full capacity. To fully discharge the
battery, operate the phone as usual until the low battery
warning is issued. You hear a low beep and the light on
top of the phone flashes red.
Removing the Battery
1
Make sure the phone is turned off.
2
Press the locking catch on the bottom of the battery.
3
Lift the battery up and away from the phone.
Step 3: Attaching the Belt Clip
(optional)
Note!
You will need a small phillips head screwdriver.
1
Remove the belt clip from the plastic bag.
2
Remove the flexible rubber plug from the top of the
clip.
