15
BusinessPhone – Operator’s Console
Outgoing Calls
Last external number redial
When you initiate an external call the system automatically stores
all the dialled digits, irrespective of whether the call was successful
or not. See also section “
***
Press to redial the last dialled external number
The display will show the dialled number.
Automatic redial
If you call an external number and receive busy tone or get no
answer, you can instruct the system to automatically redial the
number until it is available.
This function is activated via function keys, so you first have to
program a programmable key (one key required per number). See
section “
” on page 86. You can activate
automatic redial on up to five external numbers at the same time.
Activate
During the call:
Automatic redial1
g
Press to activate (pre-programmed)
The automatic redial lamp is rapidly flashing and is lit when the
request is stored and activated. Verification tone.
d
Replace the handset
or
Clear
j
Press to finish the procedure
You are called back if the called number finishes the ongoing call or
the next time the extension finishes a new call. The display shows:
u
Lift the handset when you are called back
(You can also press the answer/extend key to answer in handsfree mode.)
AUTO REDIAL CALL
C= 0 I= 0
||
||
||
directory redial
prog
Содержание BusinessPhone 250
Страница 114: ...Notes BusinessPhone Operator s Console 114 Notes...
Страница 115: ...115 BusinessPhone Operator s Console Notes...
Страница 116: ...Notes BusinessPhone Operator s Console 116...
Страница 118: ......