Ericsson BS260, Руководство пользователя

Страница: 92 / 127

Not
f
or Comm
e
rc
ia
l Use
E
ricsson Mobile
Com
m
unic
a
ti
ons A
B
Extra features 91
If no service number has been set, the voice mail notification is cleared as
soon as an external call is made.
See also “Checking for voice mail messages” on page 89.
The handset that comes with the base station is already automatically sub-
scribed to the base station as described in “Preparing for use” on page 9. Any
handsets you buy separately must also be subscribed, in order to connect them
to the base station. A maximum of eight handsets can be subscribed to the
base station. One handset can be subscribed to up to eight base stations.
Subscribing another handset
To subscribe a handset to a base station you need the authentication code of
the base station. The authentication code, which is the same as the base station
PIN code, is secret and prevents other handsets subscribing to the base station
without your approval.
If the handset does not have a subscription, it automatically enters the sub-
scription mode when it is switched on. In this case, the handset displays Press
<Page> base station first and then Enter AC: appears. If so, you can skip step two
and three of the procedure below.
To subscribe a DT200 handset to the base station:
Route: Networks » Subscribe
1. Press the
P A G E
button on the base station for at least two seconds.
2. Select Subscribe and press
Y E S
.
Enter PIN:
,
Enter AC:
or
Subscr. List Full
is displayed. In the latter case, your
handset already has eight subscriptions and to add a new subscription you
have to delete another.
3. If requested enter the PIN code for the handset (see page 78) and press
Y E S
.
Enter AC: is displayed.
4. Enter the authentication (PIN) code of the base station.
Each digit of the AC number that you enter is shown only as
for security
purposes.
5. Press
Y E S
to confirm.
The handset now looks for base stations in subscription mode using the
AC number to test if it is allowed to subscribe.
6. Wait until
Subscription Ready
is displayed for a short time.
The handset is connected to the base station. You can see its internal phone
number on the right-hand side of the display.
SUBSCRIBING HANDSETS
Home 2
01–Dec 11:32