50
Not
fo
r C
om
me
rc
ia
l Use
Er
icsso
n
Mo
bi
le
C
omm
un
ic
ations
AB
Setting signalling method
*
If you use a switchboard the home base station transmits
signals to the switchboard when you press the R key.
Switchboards use either earth or hook flash as a signalling
method. You will find details of which one is used in the
switchboard documentation. You must set the home base
station to the appropriate signalling method for the
switchboard.
Earth signalling can only be used with a suitable
switchboard.
Set the signalling method for the switchboard as
follows:
1. Press and then press the
R
key for 2 seconds.
Four dashes are displayed.
2. Enter the PIN code for the home base station
(default is 1111).
Two dashes are displayed.
3. Enter 61.
The current method is displayed (1 = tone
dialling and earth signalling, 2 = tone dialling
and hook flash, 3 = pulse dialling and earth
signalling).
4. Enter one digit to set the signalling method:
‘1’ to set tone dialling and earth signalling
‘2’ to set tone dialling and hook flash
‘3’ to set pulse dialling and earth signalling
5. Press and then press .
The signalling method is now changed.
*
This function may not be supported by your system.
Содержание BS120
