SITE REQUIREMENTS AND INSTALLATION INSTRUCTIONS
3 (28)
BRU1 MANUAL, Doc.no: b1sitreq Uen Rev PA5, 2004-02-19
1
Introduction
This document covers information about how to make the site preparations and
how to install the Mobitex Base Radio Unit 1 (BRU1).
Before installation takes place the site must be prepared, this is important not
only for a correct and safe installation, but also for saving time.
1.1
BRU1 Presentation
Base Radio Unit 1 (BRU1) is a complete one-channel compact radio base
station which uses 8 kbps data signalling. The BRU1, which is intended for
indoor operation, is a link between the mobile terminals and the area exchanges
in the Mobitex Network. All parts are integrated in the unit, see
.
Figure 1
BRU1
94/1424-LZE 401 204 Re
v A
