AP 6321 Quick Install Guide
•
For a suspended ceiling in which the tiles are flush with the T-rails,
attach the appliance feet provided in the Ceiling Tile Hanger Kit.
3.
Attach the unit to the mounting points on the mounting bracket by doing
the following:
a
Line up the two mounting slots on the bottom of the unit with the two
mounting points on the mounting bracket.
b
Slide the unit across into position so that the mounting points support
the unit.
2.3
Step 3—Connect and Power On
The AP 6321 can get its operating power directly from either of the following
sources:
•
An AC wall outlet
•
The
Internet
port when connected to a device that provides IEEE 802.3at
compliant Power over Ethernet (PoE)
If the AP 6321 is connected to both a PoE source device and an AC power
source, AC is disabled.
Figure 1
Wall Outlet Power
7
1/006 92-LZA 101 822 Uen D
|
2013-11-08