PRELIMINARY
BelAir20EO and AP 511x Series Quick Install Guide
2.5
Step 5—Connect and Power On
BelAir20EO and all AP 511x Series: Power over Ethernet
The AP gets its operating power from the
PoE
port when connected to a device
that provides IEEE 802.3af or 802.3at compliant Power over Ethernet (PoE).
Figure 2
Power Connection for BelAir20EO and All AP 511x Series Power
Over Ethernet
Note:
Ground wire and mounting hardware not shown.
Warning!
The BelAir20EO and AP 511x series AP must be connected to a power source
that complies to IEEE 802.3af or 802.3at.
Caution!
The PoE connection to the BelAir20EO and AP 511x series AP must use the
supplied Ethernet gland to ensure a waterproof connection. Failure to use the
Ethernet gland shall void Ericsson’s product warranty.
AP 5115 to AP 5118 Only
The AP can get its operating power directly from an AC power source or from
the
Internet
port when connected to a device that provides IEEE 802.3af or
802.3at compliant Power over Ethernet (PoE). If the AP is connected to both
a PoE source device and an AC power source, the AP’s internal circuits
automatically adjust to use the most suitable power source.
13
1/006 92-LZA 101 803 Uen PC1
|
2013-07-26
