Ericsson 344A3072P1, Руководство оператора, Страница: 5 / 24

IMPORTANT SAFETY
INFORMATION
13. GROUNDING AND AC POWER CORD CONNECTION - To reduce
the risk of electrical shock use only a properly grounded outlet. The
charger is equipped with an electric cord having an equipment-ground-
ing conductor and a grounding plug. Be sure the outlet is properly in-
stalled and grounded in accordance with all local codes and ordinances.
14. DANGER - Never alter the AC cord or plug. If it will not fit in the out-
let, have a proper outlet installed by a qualified electrician. Improper
connection can result in risk of an electric shock .
15. The Rapid Charger 120 Vac line cord has a grounding plug that looks
like the plug illustrated in Figure 1. A temporary adapter, which looks
like the adapter illustrated in sketches B and C, may be used to connect
this plug to a two-pole receptacle as shown in sketch B if a properly
grounded outlet is not available. The temporary adapter should be used
only until a properly grounded outlet can be installed by a qualified
electrician.
16. DANGER - Before using an adapter as illustrated, be certain the center
screw of the outlet plate is grounded. The green- color rigid ear or lug
extending from the adapter must be connected to a properly grounded
outlet--make certain it is grounded. If necessary, replace the outlet cover
plate screw with a longer screw that will secure adapter ear or lug to
outlet plate and make ground connection to grounded outlet.
17. Care should be taken when placing the charger in service to insure
proper top and bottom ventilation. A minimum of 1/4" is required be-
tween the bottom of the charger and the surface on which it sits.
5