Ericsson GE FMD LBI-38609A, Руководство оператора

Страница: 17 / 32

3. Release the PTT switch when the transmission is completed,
and listen for any reply. The TX indicator will go out when you
release the PTT switch.
CLEARING AN EMERGENCY
If your radio has been programmed as a supervisory unit, you may
clear emergency calls. When the emergency is no longer in effect, the
emergency call may be cleared as follows:
1. Press and hold the CLR switch.
2. Press and release the EMER switch. The EMER indicator will
go off.
3. Release the CLR switch.
SPECIAL CALLS (Trunked Operation Only)
The Special Call feature allows you to make calls to individual radios,
telephone interconnect calls, and/or System All Calls.
PLACING A TELEPHONE INTERCONNECT CALL
The Telephone Interconnect feature is only available on sysems with
interconnect hardware.
1. Make sure the radio is turned ON, and the proper System has
been selected. Press the SPC switch until the Special Call
name appears in the display. Press the GROUP Up/Down
switches until the desired name appears in the display.
2. Press the PTT switch momentarily and release.
3. The radio automatically transmits the preprogrammed number
stored in the radio’s memory. The system will then dial the
number and the ringing tone will be heard and the radio. When
the landline party answers, you may speak to them by pressing
the PTT switch and talking. If the selection is for DTMF overdial,
the system will respond with a pseudo dial tone. When you hear
the dial tone, proceed with step 4.
4. Once you hear the dial tone, use the DTMF microphone (op-
tional) to dial the desired number. When you have finished
17