Scratch Hardness Tester LINEARTESTER 249
7
BAE 249
2. Safety
Instructions
2.1
Meaning of Symbols
The following symbols for dangers are used in this instruction
manual.
2.2
Availability of Safety Information
The instruction manuals must always be kept at the place of
operation of the instrument.
In addition to the information contained in the instruction
manual, general and local regulations for accident
prevention and environmental protection shall be kept
available and observed.
•
It is essential to ensure that all guidelines in respect of
safety and dangers on the instrument are kept in readable
condition.
2.3
Training of Personnel
Only properly trained personnel may operate the instrument.
Who is responsible for what must be clearly established in
respect of installation, commissioning, operation, setting up
maintenance and repair.
Personnel in training must only be allowed to work on the
instrument when supervised by an experienced person.
This symbol means possible
immediate danger
to the life or
health of personnel.
If this guideline is not noted it can lead to severe danger to
health, up to fatal injury.
This signal signifies a
situation that could be dangerous
.
Non observance of this guideline can lead to injury or to
damage to equipment.
This symbol draws the attention to special tips for the user and
information that is particularly useful.
•
It refers to aspects which will enable you to use your
Instrument to optimum effect.
Danger
Warning