It is advised that installation is
performed by person, who has
experience working with 220/110V
voltages. Before installing the PSU, make
sure your modular system is turned off
and disconnected from wall power socket.
Follow simple instructions below, and you
will not go wrong with the installation!
Use spacers and screws supplied with the
Erica Fusion PSU kit to fix it in your modular
case next to the eurorack power supply unit!
Disconnect 220/110V wires from eurorack
PSU!
TO GND
One side of Erica Fusion PSU 6VAC output
has to be connected to the GND of your
modular system. Use the wire supplied with
the kit to do so. Since 6VAC circuit is
isolated, if you connect this wire
somewhere incorrectly. But that may affect
quality of sound of Erica Fusion models.
Congratulations, you have completed
installation of Erica Fusion 6VAC PSU! Now
you can try modules!
Connect 220/110V wires to relevant lugs of
Erica Fusion PSU!
Use wires supplied with the Erica Fusion PSU
kit to connect eurorack PSU to relevant lugs
on the Fusion PSU module!
ERICA FUSION 6VAC PSU INSTALLATION
Erica Fusion VcF
