5
Solder trimpots and pinheader for a jumper. The jumper
configures cutoff CV potentiometer. If placed on top
pins, the CV potentiometer works as attenuverter
allowing inverted envelopes, if on bottom pins
– it’s
simple attenuator. Insert ICs! Mind the orientation!
7
Turn the Controls board around and solder the PSU
cable socket. Solder two electrolytic capacitors
–
they should be placed horizontally.
6
Turn the Main board around and solder male
connectors! Make sure, they are 90
o
against
the PCB! Place female connectors on the male
connectors!
8
Now connect both boards together and solder
female socket to the Controls board!
GUIDE TO ASSEMBLY OF ERICA SYNTHS BASSLINE