4
Installation
Fig 2
Fix the Chime on to the bracket by aligning the circle joint in the
chime with the projection on the bracket and push towards to
your left as shown in Fig 2.
Installation of Chime
Fig 1
Inbuilt Sounds in Chime
When the Door Switch is activated it acts as a calling bell.
When Chime switch is set in the
“DOG“
mode, it makes a
”BARKING”
sound.
When Chime switch is set in the
”CAT”
mode, it makes a
“MEOWING”
sound.
This switch is located behind the Chime.
This switch is located behind the Chime.
When the Chime sounds, the chime will signal you that
there is someone at the door or your pet is calling for you.
Step 1
Step 2
Mount the bracket on the wall with the screws anywhere
inside the home as per your convenience. The bracket has to
be mounted in the position as shown in Fig 1.
Fig 3
