6
[email protected] • 800.755.4950 •
Check out www.GoErgo.com
for all of our products & services
Chair
(ECO-MESH-DT2-ARL)
Your mobile offi ce chair is equipped with an auto-return
cylinder which prevents it from spinning while the vehicle
is in motion. The mechanism will keep the chair facing
the same direction when it is unoccupied.
A. BACK ANGLE -
To adjust the back angle, pull
up on the TRIANGULAR paddle and hold it in
the up position. Lean backward or forward until
the backrest is at the desired angle. Release
the paddle to lock. When adjusted correctly
the angle between your upper body and thighs
should be greater than 90 degrees.
B. LUMBAR SUPPORT -
To adjust the lumbar support,
push the lumbar pad up or down to the desired height.
C. SEAT HEIGHT -
To raise the seat, pull up on the
SQUARE paddle while raising your weight off the
chair. To lower the seat, pull up on the paddle while
sitting. Release the paddle to lock.
D. SEAT ANGLE -
To adjust the seat angle, pull up on
the CIRCULAR paddle and shift your weight forward
or backward until the seat is at the desired angle.
Release the paddle to lock.
See the Accessories section at the end of this guide for
details on how to order optional arms for your chair.
If your chair cannot be adjusted to a
comfortable position for your body type,
see the Optional Accessories section
for details on alternate cylinders.
C
D
A
