505 E. Hawley Street, Suite 210, Mundelein, Illinois 60060 (847)566-4950
Parts You May Need to Purchase
You may need to purchase longer screws to attach your monitor to the VESA base. Most
monitors will need
at least a 16mm long
M4-0.7 pan head Phillips screw (Qty 4).
Refer to your monitor
’s
user guide for specific information pertaining to the screw size needed
for your model.
Tools Needed
•
Phillips screwdriver
•
Pliers
•
Drill
•
3/8” Metal Drill Bit
•
Pencil
Installation
1.
Determine where you want the Monitor Mount
installed.
Be sure to check under the desk to ensure
that you will not be drilling through the desk frame.
2.
Use the base of the Female Tele-pole (RAM-VP-
TBF7U) as a template to mark where the holes will
be drilled.
3.
After drilling the 4 holes, following the assembly
instructions included with the unit.
4.
Remove the monitor from its stand and then
unscrew the mounting plate on the back.
