7
ASSEMBLY
WEIGHT ADJUSTABLE ESPREE PNEUMATIC TABLE BASE
STEP 8
Use a rubber mallet to install the four end caps into the open
ends of the top supports.
• Tap the end caps with the mallet to secure them in position.
STEP 9
Adjust the position of the frame before screwing
it to the table.
• The frame should be centered from side to side.
• The rear of the feet should align with the rear
of the table, and the rear of the cover should be
5" from the rear of the table.
STEP 10
• Use the ten #12x2¾ pan head screws and a #3 Phillips screwdriver.
Align Rear of Feet with Rear of Table
5"
Center Frame Side to Side
End Cap
Top
Support
#12x2¾
