Ergomotion quest 1.0, Руководство пользователя

Страница: 38 / 58

2
(up or down) of the base with the remote control. This should realign
the base’s activating mechanisms to the proper operational position. In
normal base operation, the wheels, which allow the bed to maintain its
distance from the wall, will make contact with the steel platform supports
of the base creating a contact noise. When entering, exiting or shifting
weight on the base, this contact noise may be audible as the wheels make
contact. This is normal.
MATERIALS
Ergo adjustable bases are constructed from various materials including
woods, metals, plastics and fabrics. Tension, pressure or movement
applied to the frame, platform or shroud through general use may create
an audible sound.
MASSAGE OPERATION AND LOCATION ENVIRONMENT
The massage feature will emit a tone during operation. This is normal.
As the massage intensity level is increased, the tone will intensify. The
volume of this tone is directly related to the location environment.
For example, when demonstrated in a show room, the surrounding
environmental noise will cover some of the massage noise. However,
when installed in a home setting with wooden floors, carpeted or not,
the massage volume will be more noticeable. To minimize this resonance,
place a piece of carpet, or rubber caster cups, under each leg or caster of
the base. It is possible to experience vibration or noise from the exterior
bed frame, headboard brackets, headboards or footboards if mounting
bolts are not firmly tightened.
Levels 1-6 of massage intensity represent the revolutions of the motor
per minute. Level 6 provides the maximum number of RPMs. However,
this does not mean that the feeling of vibration is the strongest.
Depending on the mattress material, thickness, and positioning of the
user, the feeling of vibrations will differ. We encourage the user to find
the massage intensity setting that suits them best. It is important to
understand the physics of vibrations. Just as an engine may run rough
during idle, as the RPMs increase, the vibrations change concurrently.
TOLERANCE
All Ergo adjustable foundations, depending on make and model, are
designed and manufactured to perform and function within designated
quality control parameters. Bases are subject to meticulous and rigorous
inspections during the quality control process to ensure bases will operate
within these standards during normal operating use. Normal operating
use is defined as the following: Adjustable foundation is to be operated
with a mattress and load. Testing procedures require lifetime cycle tests
with up to 120kg distributed load. The angle (designated “
α
” in figure 1)
between the back section and the flat section for various configurations
of the mattress support platform shall be ± 3°, which translates to a
tolerance of up to 1 ½”.
The angle (designated “
β
” in figure 1)
between the flat section and foot section
for various configurations of the mattress
support platform shall be ± 3°, which
translates to a tolerance of up to ¾”.
Any adjustable foundation deemed to
be within these allocated tolerances
is considered to have met the
manufacturer’s quality control standards.
THAT “NEW PRODUCT” SMELL:
Some people notice a slight odor to their new adjustable base—this can
come from our material manufacturing process. This smell is normal and
usually disappears before the product reaches you. Sometimes, however,
this smell may still be noticeable. It usually disappears after a few weeks,
providing adequate ventilation of the product and the environment.
BREAK IN PERIOD:
You can speed up the break-in period by simply spending time in the
adjustable bed through activities such as reading, watching TV or playing
safety precautions and usage statements
Adjustable
Bed Tolerance
Ergomotion Inc. | ph 1-888-550-3746 | fx 805-979-9399 | www.ergomotion. com
All Ergomotion adjustable foundations, depending on make and model, are designed and manufactured to perform and
function within designated quality control parameters. Bases are subject to meticulous and rigorous inspections during
the quality control process to ensure bases will operate within these standards during normal operating use.
Normal operating use is defined as the following:
-Adjustable foundation is to be operated with a mattress and load. Testing procedures require lifetime cycle
tests with up to 120kg distributed load.
The angle (designated “
α
” in figure 1) between the back section and the flat section for various configurations of the
mattress support platform shall be ± 3°, which translates to a tolerance of up to 1 ½”.
The angle (designated “ β ” in figure 1) between the flat section and foot section for various configurations of the mattress
support platform shall be ± 3°, which translates to a tolerance of up to ¾”.
Any adjustable foundation deemed to be within these allocated tolerances is considered to have met the manufacturer’s
quality control standards.
(α°)
(β°)
When operating a "paired" split base setup there may be a time latency up to 1.5 seconds between each bases articulation.
Blake Pettit
Quality Assurance Manager
Ph 805-979-3875
Fx 805-979-9399
www.ergomotion.com