Check that all cables are firmly connected.
-
Check cables: are they cut or disconnected?
-
Check mains fuses: are they serviceable?
-
Contact Ergomat A/S for service
-
The table height adjustment function is out of control:
Cut supply to mains plug or remove the mains plug from the socket. Reconnect power. If there is still a problem,
-
contact Ergomat A/S.
The table moves at an angle.
Reset the table (Please remember to remove cable tray first)
-
The table is no longer at level:
Check the adjustable levelling screws on table feet. If the screws are OK, reset the table (Please remember to
-
remove cable tray first).
The table makes an unusual noise.
Check that the table is not scraping up against other tables/obstructions.
-
Listen to detect whether the sound is coming from the table lifting columns or from the control box. If the
-
sound comes from the lifting columns or the control box, disconnect electricity supply. Please contact Ergomat
A/S. Do not attempt height adjustment until the table has been serviced!
Declaration of conformity
We declare that the ErgoPerfect® NS height adjustable table conforms to the following directives and other normally
applicable documents:
European Council Directives 98/37/EF
•
European Council Directives 89/336/EØF (“the EMC Directive”) and subsequent amendments
•
European Council Directives 73/23/ and subsequent amendments
•
With reference to the “Machinery Directive” (98/37/EF) we are obliged to state that:
The height adjustable table is regarded as machinery.
•
The height adjustable table must not be put into use unless it is fitted and installed in accordance with the
•
instructions of this user manual.
Local agent contact information: Tel: +45 7022 1840 or email: [email protected].
Ergomat A/S hopes you have a good day at work!
Sunekær 13-15, DK-5471 Søndersø, Denmark, www.ergomat.com
Packing list
Pack A:
1 # wall bracket
2 # U-profiles
1 # table top frame
Pack B:
4 # concrete screws Ø7.5x80
4 # steel set screws Ø8x14
2 # table lifting columns
1 # control box
16 # insex screws Ø8x25
14 # chipboard screws Ø4x20
1 # control panel
1 # mains cable
Pack C:
1 # cable tray
2 # clips
6 # chipboard screws Ø4x20
4