ergoline OPEN SUN PILOT EXTREME POWER, Руководство по эксплуатации, Страница: 98 / 128

Cleaning and maintenance
34/62
Component Interval Activity See page
After each tan
ni
ng s
ess
io
n
Wh
en
ne
ce
ssary
50 h
3 Control panel X Cleaning and disinfection 32
4 Footrest X Cleaning and disinfection 32
5 Seat and armrests X Cleaning and disinfection 32
6 Handles X Cleaning and disinfection 32
9 Adjustable air nozzles X Cleaning and disinfection 32
10 Backrest X Cleaning and disinfection 32
Protective goggles X Cleaning and disinfection 32
MP3 cable X Cleaning and disinfection 32
1, 7 Acrylic glass surfaces X Clean 32
11 Nozzles AQUA FRESH AROMA system X Clean 32
12 Surfaces X Clean 32
2, 8 Filter X Remove and clean filter 47
NOTE:
Cleaning must be confirmed after each tanning session by
pressing the START/STOP button (when the warm-down
time for the main fan has finished).
5.5 Maintenance
Maintenance and care play a major role in deciding whether the device meets
the requirements placed on it in a satisfactory manner. Compliance with the
specified maintenance intervals and the careful conducting of the mainte-
nance and care work are therefore absolutely necessary.
The current operating hours of maintenance parts can be called up in service
mode (see 'Voreinstellungen/Presettings', order no. 1011777-..).
We point out that the device must be subjected to regular inspections by our
customer service or an approved specialized company every 12 months (from
commissioning) to maintain its proper condition!
Inspections and maintenance work that has been carried out must be entered
in the equipment, operating and maintenance booklet (order no. 1010363-..).