7
(1)
( 2 )
Fig. 2.1A
2 INSTALLATION AND OPERATION
2.1 Installation and dismantling of the ceiling hoist
Luna can be mounted in different modes to satisfy varying needs. The mode of mounting is
decided between the buyer and the Ergolet representative. The Luna ceiling hoist has been
readied for mounting in one of the following modes:
Be aware that the Luna weights 6,7 kg.
A) Luna mounted on the track
Luna is mounted directly on to the track, where a cart is also
positioned to receive the unit. This cart has a bayonet bracket
to connect with the corresponding receptacle on the Luna
(Fig. 2.1A).
1)
Lift the Luna cassette up to the cart and connect the
bayonet bracket into the Luna (resistance will be felt
since the bracket is spring loaded).
2)
Luna is now turned 90˚ clockwise. When Luna is in
place a click will be heard. This indicates correct
mounting.
If Luna is not mounted correctly an electronic safety device prevents operation
of the unit.
Dismounting of Luna from the track
1)
Press Luna upwards against the cart (the unit is spring loaded).
2)
Turn 90˚ anti clockwise to dismount the Luna.
B) Luna mounted on the strap
The strap and hook for mounting is already attached to the
Luna cassette. (Fig. 2.1B)
1)
Luna is mounted by connecting the strap with the
spring-loaded hook to the cart in the track.
2)
Insert the hook in the bracket on the cart and pull
down until the hook is fixed in the bracket.
Always check that the hook is clicked before the Luna is used.
Fig. 2.1B
!
!
!
(1)
Содержание Luna IPx4
Страница 2: ...2...