Step 5-2
Hang the TV on the TV Plate.
Step 5-3
Tighten the Bolts [K] on the safety locks into place
until they are pulled firmly against the TV Plate.
HEAVY! You may
need assistance
with this step.
Phillips Screwdriver
(NOT lncluded)
Step 5-2
K
Locking
Step 5-3
Adjustment for Non-Level Ceilings
Step 6 Adjustments
1. Slightly loosen the Bolt [b1] with the Allen Key [08].
2. Adjust the mount until it hangs down vertically.
3. Tighten the Bolt [b1] to secure the tilt angle into
place.
b1
b4
08
WARNING:
To avoid personal injury and property damage, DO NOT loosen Bolt [b4]
during the adjustment for non-level ceilings.
WARNING:
Bolt [b4] should not be
loosened in this step as
it could cause the TV to
fall and cause injuries to
people and property.
Supplied Hardware for Step 6
08
x1
3/16 in(5mm)
Allen Key
7/16 in(11mm)
Wrench
10
x1
15
