Ergo EI6122 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 16

Ergo EI6122 Скачать руководство пользователя страница 2

Please carefully read all instructions before attempting installation. If you do not
understand the instructions or have any concerns or questions, please contact
our customer service at

[email protected]

CAUTION: Avoid potential personal injuries and property damage!

• Do not use this product for any purpose that is not explicitly speciﬁed in this

manual. Do not exceed weight capacity. We are not liable for damage or injury
caused by improper mounting, incorrect assembly or inappropriate use.
• This product is designed for use in wood stud, solid concrete, concrete block
and brick walls - DO NOT install into drywall alone. Please note: When installing
into a recreational vehicle, please consult with your manufacture to determine
the correct screw depth to use for your installation.

• The wall must be capable of supporting ﬁve times the weight of the TV and

mount combined.
• Before drilling check your wall thickness to prevent damage to your recreational
vehicle.

Minimum VESA pattern: 100mm/4 in.(W)x100mm/4 in.(H)

100 mm ≈ 4 in.

75 mm ≈ 3 in.

200 mm ≈ 7 7/8 in.

MAX:200mm/8 in.

MAX:200mm/8 in.

Check the VESA Pattern of Your TV before the Installation

IMPORTANT SAFETY INFORMATION

If your TV VESA is greater than 200x200 mm/16x16 in. or less than VESA

75x75mm/3x3in., this mount is NOT compatible.

If this mount is NOT compatible, please contact customer service at

[email protected] to ﬁnd a compatible mount.

CAUTION

Verify Your Wall Construction

If you are not sure the wall
construction, please contact
our customer service at

[email protected]

Wood Wall

Wood Studs

(with Drywall)

Solid Concrete

or Concrete Block

DO NOT

install into drywall

alone

01

«
1
2
3
4
...
»

Содержание EI6122

















Отзывы:

Нет отзывов