Ergo 40DF5000, Руководство пользователя

Страница: 69 / 92

3. Installing the LED TV
Installing the Stand
1. Place the TV set on soft cloth or cushion with face down.Place the base in position as shown.
(see Figure 1).
2. Fix the bracket with stand to the bottom of the TV with the four screws (see Figure 2)
3. Stand the TV up. (see Figure 3)
Disconnecting the Stand
1. Lay the TV
flat
on a table with the LED screen face down.To prevent the TV from being scratched,
put a piece of soft cloth on the table on which the screen will be set. (see Figure 1)
2. Then remove 4 screws of the stand as show. (see Figure 2)
3. Then you successfully removed the base . (see Figure 3)
7
Mounting on a Wall
CAUTION:
• Remove the stands before installing the TV on a wall mount bracket (not supplied) by performing
the stand attachment in reverse.
• The distance between the holes is 2 00 x 2 00 mm in width and height. Tighten the screws (M 6 x 8 ,
not supplied ) firmly to prevent the TV from tilting forward. Do not over tighten.
Figure 1 Figure 2 Figure 3
Figure 1 Figure 2 Figure 3