2
TIMER PROGRAMMING
This is the digital timer unit for the Autopetfeeder. The timer plugs in to the wall socket and has two outlets, one
outlet is labeled as
“Power”
which is on the left hand side of the timer, directly connects to the power supply, and
the second outlet is labeled as
“Timer”
which is on the right hand side of the timer switches the Autopetfeeder
ON
and
OFF
based on the timer settings. The indicator will glow when ever the feeder is
ON
.
First time use :
Connect your digital timer unit into the wall socket. This will charge the internal battery if
you are using the timer for the first time. Reset it by pressing the Master Reset button using a small pin such
as a paperclip. This will reset the timer. All other programming functions can perform without plugging the
timer in to the wall socket.
NOTE:
The timer may have to be charged for 10 minutes prior to use if the timer display is blank. Press the Master Reset
button after 5 minutes while the timer is charging.
