EREAGLE ERE-E1B, Руководство пользователя

Страница: 16 / 36

16
4. Advanced Operation
4.1. Mode Description

Test Mode
Enter this mode, the red light flashes, the camera automatically enter the real-time preview interface.
After the system automatically detects with normal status the indicator lights will turn off.
After a few seconds, the PIR status can be observed by the color of the flashing indicator. Red indicates
the side PIR is triggered and blue indicates the main PIR is triggered.
If the camera is password protected, you need to input password to enter the preview interface.
Following Operation can be performed in this mode:
View video and images: You can enter by pressing the button to view the screen the shooting screen
detail.
Parameter settings: Enter the menu button to set parameters.
Laser positioning: in this mode press the Left direction button to open the laser alignment, to check
the installation position of the camera.
Shooting test: Press Right direction button to take images and video in test mode.
Quick Setup: Press UP and Down direction button to quickly switch camera mode and video mode.
PIR detection hint: Support PIR detection indication in this mode.
Boot screen Real Time Screen
Shooting mode and definition are displayed at the upper left corner of the screen.
Upper right corner it shows the battery level; when the battery is less than 20%, the icon turns red.
The screen below displays the status of the SD card; Without SD card, the icon is displayed in red and
will give alarm. The bottom right display total photos quantity, the taken photo quantity and the remaining
video recording time.
In this mode the camera does not take photos for detected heat source object, only LED indicator hints.